Planet Industrial L3 16-Port 10/100/1000T 802.3at PoE M12 + 2-Port 10GBASE-T M12 Bypass + 2-Port 10G Q-ODC

> Physical Port

> ．16 x 10/100/1000BASE-T M12 ports (Ports 1 to 16) with IEEE 802.3at PoE+ injector function

> ．2 x 10GBASE-T M12 ports (Ports 17 to 18) with bypass relay, backward compatible with 5G/2.5G/1GMbps data rate

> ．2 x 10GBASE-X Q-ODC fiber connector (Ports 19 to 20)

> ．One M12 A-coded 5-pin male connector for USB data to RS232 console interface for basic management and setup

> ．One M12 A-coded 5-pin male connector with alarm, digital input and digital output functions

> ．One M23 A-coded 5-pin male connector with input voltage range of 24 to 110 VDC (Operating voltage: 16.8 to 137.5 VDC)

> Power over Ethernet

> ．Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE

> ．Power up to 8/16 IEEE 802.3at devices

> ．Supports PoE power up to 36 watts for each PoE port

> ．Auto detects powered device (PD)

> ．Circuit protection prevents power interference between ports

> ．Remote power feeding up to 100m in standard mode and 250m in extended mode

> ．PoE management features

> ．Intelligent PoE features

> Industrial Protocol

> ．Modbus TCP for real-time monitoring in the SCADA system

> ．Supports IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode

> Layer 3 IP Routing Features

> ．Supports maximum 128 static routes and route summarization

> ．IPv4 dynamic routing protocol supports RIPv2 and OSPFv2

> ．IPv6 dynamic routing protocol supports OSPFv3

> ．IPv4/IPv6 hardware static routing

> ．Routing interface provides per VLAN routing mode

> Layer 2 Features

> ．Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

> ．High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

> ．Storm Control support

> ．．Broadcast/Multicast/Unicast

> ．Supports VLAN

> ．Supports Spanning Tree Protocol

> ．Supports Link Aggregation

> ．Provides port mirror (many-to-1)

> ．Loop protection to avoid broadcast loops

> ．Supports ERPS (Ethernet Ring Protection Switching)

> ．Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices

> ．Link Layer Discovery Protocol (LLDP)

> Quality of Service

> ．Ingress Shaper and Egress Rate Limit per port bandwidth control

> ．8 priority queues on all switch ports

> ．Traffic classification

> ．Strict priority and Weighted Round Robin (WRR) CoS policies

> ．Supports QoS and In/Out bandwidth control on each port

> ．Traffic-policing on the switch port

> ．DSCP remarking

> Security

> ．．Broadcast / Multicast / Unknown Unicast

> ．Authentication

> ．．Built-in RADIUS client to co-operate with the RADIUS servers

> ．．DHCP Option 82

> ．．RADIUS/TACACS+ login user access authentication

> ．Access Control List

> ．MAC Security

> ．．Static MAC

> ．．MAC Filtering

> ．Port Security for Source MAC address entries filtering

> ．DHCP Snooping to filter distrusted DHCP messages

> ．Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding